Top Six tips on how to get candle wax out of carpet

How to get wax out of carpet

Candles can create a cosy atmosphere in any home, but accidents happen, and wax can end up on your carpet. If you're unsure how to remove candle wax from your carpet, don't worry – with a few simple tools and techniques, you can have your carpet look as good as new in no time.

Learn how to remove candle wax from your carpet with our step-by-step guide. Follow our tips to get your carpet looking as good as new in no time.

Here are the steps you need to take to get candle wax out of carpet:

Step 1: Scrape off the excess wax

The first step in removing candle wax from your carpet is to scrape off as much of the wax as possible. Use a blunt knife or spoon to gently scrape off any wax chunks on the carpet's surface. Be careful not to damage the carpet's fibres while doing this.

Step 2: Vacuum up the loose wax

After removing as much of the wax as possible with a knife or spoon, use a vacuum cleaner to suck up any loose pieces of wax still on the carpet. Use the hose attachment to get into all the nooks and crannies where the wax may have fallen.

Step 3: Apply heat to the remaining wax

The next step is to use heat to soften and melt the remaining wax in the carpet fibres. You can do this by placing a clean, white cloth over the wax and using an iron set to a low heat setting. Press the iron onto the fabric, moving it back and forth over the wax for about 30 seconds.

Step 4: Blot up the melted wax

After you've applied heat to the wax, it should be melted and softened enough to be absorbed into a clean cloth. Use a fresh white material and place it over the melted wax. Press down on the fabric to absorb the melted wax. Keep moving the cloth to a clean area until you absorb as much wax as possible.

Step 5: Clean the carpet

Once you've removed as much of the wax as possible, it's time to clean the carpet to remove any remaining residue. You can use a carpet cleaning solution or warm water and dish soap. Apply the solution to the affected area and blot it into the carpet with a clean cloth or sponge. Then, rinse the area with clean water and blot it dry with a clean cloth.

Step 6: Repeat if necessary

If there is still wax left in the carpet, you may need to repeat the process of applying heat and blotting up the melted wax a few times until the wax is completely gone. Be patient and keep repeating the steps until the wax is removed.

Tips for Removing Wax from Carpet

  • Use a white cloth or paper towel to absorb the melted wax. Coloured fabrics can transfer dye to the carpet fibres, worsening the stain.
  • Avoid using too much heat when applying the iron. High heat can melt the carpet fibres, causing them to fuse and creating a permanent mark on the carpet.
  • Be patient when removing candle wax from the carpet. Removing all the wax may take a few attempts, but rushing the process can lead to more damage to the carpet fibres.


Removing candle wax from your carpet can be daunting, but with the right tools and techniques, it's possible to restore your carpet to its original condition. By following the steps outlined above, you can remove candle wax from your carpet and return to enjoying your home's cosy ambience. Remember to be patient, take your time, and feel free to seek professional help if you need help with removing wax from carpet.